Ghost Saddle Pads - long flap

These stirrup straps are thin, yet very strong. Made from granite biothane, they'll hold up longer than leather but don't create a bump under your leg. Even better when you run the buckle at the bottom and use the handy keeper to put the excess strap neatly out of the way.
The standard configuration Ghost stirrup straps are 1" granite biothane and can work with any stirrup style. These are the only Ghost stirrup straps that work with the English slip-on fenders.
If you prefer a webber style strap, check out the T-bar and Conway Straps.

Can affect the rider's pelvis tilt, refines the twist, and slightly deepens the seat. It goes under the front of the seat, with the wide side toward the pommel and the pointy side toward the rider. It can be moved forward/back for a greater effect.
Riders who have a low pelvic floor may not like the bolster. For those who are looking at the product to tilt the pelvis, one of the other rider balancing aids will have a great effect without discomfort.
To install, release the velcro under the front center of the seat, then tug the seat back over the front dees. Place the bolster and press the seat back into position, making sure all is still symmetrical. Replace the front velcro tab and push the seat back over the front dees. This last part can be difficult, especially when the saddle is new - to make it easier, pull some twine or a shoelace through the dee to give you more leverage.

Panels for Ghost saddles - and can work for other saddles with loop-side velcro underneath. Price is for a pair of panels or the complete western skirt with integrated panels.
New option - XL velcro opening panels, great for those really wide horses, but may also provide more stability for slab sided horses. (NOT available - or needed - with Thick insert option) Panels for 16" seat run just over 20", for 17" seat is about 21", for 18" is a bit over 22". Important - the XL panels are 7" wide so you need to make sure your pad structure supports that! See more details below.

Ghost now has several options for girth/cinch rigging. The original sliding V is great as it allows the rider to independently position the girth and saddle and the sliding V will move with the horse through all gaits. Any saddle may be ordered with cinch rigging, either nylon or leather covered nylon (some have commented the leather covered doesn't slide as well as the nylon). And now we've added the option for the Cavallin/Puro rigging for all saddles as well. This rigging is simple and in some cases more stable since it can't move as easily with the horse, but the rider can adjust the girth position by tightening one billet more than the other to create the desired angle.
Here's a great video on using the western cinch rigging - https://www.youtube.com/watch?v=RzkIWioQAXo