Stirrup strap keepers

These slip on over girth straps if there is a bigger gap between the bottom of your pad and the girth (short flap saddles or larger horses). They can also be ordered with the top layer to match your saddle color. Backing options are neoprene, black, brown, or white wool blend (or exclusive sheepskin, but that's really more for show than practical use and typically order along with either a zalea or Cagliari/Maremma saddle.)
Sold as a pair.

Can affect the rider's pelvis tilt, refines the twist, and slightly deepens the seat. It goes under the front of the seat, with the wide side toward the pommel and the pointy side toward the rider. It can be moved forward/back for a greater effect.
Riders who have a low pelvic floor may not like the bolster. For those who are looking at the product to tilt the pelvis, one of the other rider balancing aids will have a great effect without discomfort.
To install, release the velcro under the front center of the seat, then tug the seat back over the front dees. Place the bolster and press the seat back into position, making sure all is still symmetrical. Replace the front velcro tab and push the seat back over the front dees. This last part can be difficult, especially when the saddle is new - to make it easier, pull some twine or a shoelace through the dee to give you more leverage.

Carry your saddle without stirrups banging into your shins! These nifty straps connect to the back dees and have a scissor snap so you can quickly secure your stirrups for saddling or carrying. The biothane version are made from beta biothane in the US. If you want to match your saddle material, choose the Ghost version and specify color/material in the comments - see https://badlandsequine.com/color-zones-and-materials - if needed. I keep some black Ghost ones in stock and I have a few in biothane colors from Moss Rock. If you want to get the biothane a bit faster, visit www.MossRockEndurance.com since I won't have them all the time.

Wedged shim inserted between base and closed panels. Perfect for those who want the classy look of the closed panels (especially with a matching color/material) but need a little lift in front to balance the rider for horses who might be downhill where the saddle wants to side or who have less curvature than the Ghost base. These work great with velcro opening panels too, and sometimes are a bigger solution than the felt shims that can go inside the panel. Sold in pairs.